抛丸机

缅甸某钢结构厂订购我司一台Q1220辊道通过式抛丸机，老客户在缅甸投资，缅甸抛丸机生产厂家，合格高效的缅甸抛丸机，缅甸抛丸设备，缅甸抛丸清理设备，缅甸钢结构抛丸机，缅甸H型钢抛丸机，缅甸型材抛丸机，缅甸通过式抛丸机生产厂家哪家好？缅甸抛丸机价格哪家性价比高？

缅甸抛丸机使用说明需要英文简介，Q1220辊道通过式抛丸机的工作原理：

Roller type shot blasting cleaning machine is to hang the workpiece on the conveying roller, the roller conveying system will forward the workpiece, when the workpiece into the cleaning room, shot blasting machine began to work sequentially. After shot blasting, the oxide scale, dirt and other adhesives on the steel surface are cleaned up, and the treated surface can reach Sa2-2.5 grade. The working mode of shot blasting machine is continuous circulation.

The pellets thrown by the shot blasting machine are collected and processed by the circulation treatment system, and continue to be used for shot blasting machines. The working mode of the circulating system is as follows: the scattered projectiles are conveyed to the bucket elevator through the lower longitudinal screw conveyor and the slope; the bucket elevator elevates the pellets and impurities to the upper part of the cleaning room; the upper transverse screw conveyor conveys the pellets and impurities to the high efficient BE separator; after being treated by the BE separator, the dust and impurities are separated from the good pellets. A good pellet is stored in the storage hopper for use by the shot blasting machine.

In order to deal with the large amount of dust produced during shot blasting and rust removal, the machine is equipped with a new type of high-efficiency LT-24 pulse back-blowing filter cartridge type dust collector. The dust collector has the advantages of small volume, high dust removal efficiency, easy installation and maintenance, and the purified air is much lower than the smoke and dust discharge standards of the same industry.

如果您有出口的订单请跟我们联系我们会为您提供专业的抛丸机技术方案与一步到位的抛丸机价格哦！